Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heater Matrix of the Ford Ka

Model: Ford Ka MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Heater control valve

See other generations:
Video tutorial

The cabin heating system actually uses the engine coolant, which is passed through a specific valve into a small radiator located inside the cabin, allowing it to heat the surrounding air. This valve is operated by an electric motor that regulates the opening of the valve based on the climate control settings.

The valve is located in the engine compartment, just below the windscreen, in a central position.

To access it, you must remove the plastic cover grille.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Replace the Heating Radiator on a Ford Ka?
How to Replace the Heating Radiator on a Ford Ka?
Ford Ka (1996-2008 / MK 1) To replace the cabin heating radiator on a Ford Ka, open the bonnet to access the bolts securing the plastic grille at the base of the windscreen. Un…
Analysis of Heating Valve Malfunction
Analysis of Heating Valve Malfunction
Ford Ka (1996-2008 / MK 1) This short video disassembles the heating system valve of a Ford Ka piece by piece to determine the cause of its failure. As shown in the video, cool…
How to Replace the Heater Tap on a Ford Ka
Ford Ka (1996-2008 / MK 1) If cold air continues to blow from the vents even when the cabin heater is activated, it is likely that the tap controlling the flow of hot water in …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos