Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heater Tap on a Ford Ka

Model: Ford Ka MK 1 - Years 1996-2008
Part: Heater control valve

If cold air continues to blow from the vents even when the cabin heater is activated, it is likely that the tap controlling the flow of hot water in the cabin heating circuit is damaged; this tap (which is actually a solenoid valve) is located just below the windscreen, beneath the plastic protection grille and is easy to find as a replacement in the aftermarket. Fortunately, to replace it, you do not need to remove the internal radiator as it is connected to it via two hoses secured with clips; proceed by draining the coolant, disconnecting the battery, then removing the wiper control arms and the plastic grille; at this point, simply disconnect the connector and hoses to proceed with the tap replacement.

Updated on 23 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Heater Matrix of the Ford Ka
How to Replace the Heater Matrix of the Ford Ka
Ford Ka (1996-2008 / MK 1) The cabin heating system actually uses the engine coolant, which is passed through a specific valve into a small radiator located inside the cabin, a…
Replacing the Heating Tap
Replacing the Heating Tap
Ford Ka (1996-2008 / MK 1) The heating tap is located beneath the wiper plastic cover. A common problem with many Ford Ka and Fiesta models is the tap breaking: the motor then …
How to Replace the Heating Radiator on a Ford Ka?
How to Replace the Heating Radiator on a Ford Ka?
Ford Ka (1996-2008 / MK 1) To replace the cabin heating radiator on a Ford Ka, open the bonnet to access the bolts securing the plastic grille at the base of the windscreen. Un…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos