Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire warning light on the Ford KA?

Model: Ford Ka MK 3 - Years 2016-2019
Part:

In this tutorial, we will see how to reset the tire warning light on the Ford KA, a very simple and quick operation that should only be performed once the correct pressure for each tire has been restored according to the instructions in the manual. First, let's go inside the cabin; then, insert the key and turn on the instrument panel. Next, scroll through the various information on the display using the button located at the end of the left control lever, navigate to the "Tyre monitor" option, and perform the reset by holding down the same button.

Posted on 13 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Ford Ka?
Ford Ka (2016-2019 / MK 3) To reset the tyre pressure warning light on the Ford Ka, insert the key into the ignition and turn it to switch on the instrument panel. You will not…
Reset Tyre Pressure Warning Light on Ford Ka 2
Reset Tyre Pressure Warning Light on Ford Ka 2
Ford Ka (2008-2016 / MK 2) In this short video tutorial, you will learn how to reset the tyre pressure warning light on a Ford Ka second series. Before performing the operation…
How to reset the tire pressure sensor on a Ford Ka?
How to reset the tire pressure sensor on a Ford Ka?
Ford Ka (2016-2019 / MK 3) To reset the tire pressure warning light on a Ford Ka, start by turning on the instrument panel without starting the engine. Use the buttons on the d…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos