Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Ford Ka?

Model: Ford Ka MK 3 - Years 2016-2019
Part: Tire pressure warning light

To reset the tyre pressure warning light on the Ford Ka, insert the key into the ignition and turn it to switch on the instrument panel. You will notice that the tyre pressure warning light appears on the instrument panel: to turn it off, press and hold the button located on the central dashboard panel, which has the icon for insufficient tyre pressure. While holding the button, a loading symbol will appear on the display, after which the tyre pressure warning light will be reset.

Updated on 19 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Reset Tyre Pressure Warning Light on Ford Ka 2
Reset Tyre Pressure Warning Light on Ford Ka 2
Ford Ka (2008-2016 / MK 2) In this short video tutorial, you will learn how to reset the tyre pressure warning light on a Ford Ka second series. Before performing the operation…
How do you reset the Service light on the Ford Ka?
How do you reset the Service light on the Ford Ka?
Ford Ka (2016-2019 / MK 3) On the Ford Ka instrument panel, it will be possible to completely make the Service light disappear by inserting the ignition key into the correspond…
How to reset the tire warning light on the Ford KA?
How to reset the tire warning light on the Ford KA?
Ford Ka (2016-2019 / MK 3) In this tutorial, we will see how to reset the tire warning light on the Ford KA, a very simple and quick operation that should only be performed onc…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos