Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from a 2007 Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Car stereo

As shown in the video, insert the four small keys necessary for removing the radio into the appropriate slots. They should be inserted with the long part facing outwards. You should hear a small click indicating that the keys have engaged. Once done, put on a pair of gloves to avoid cuts and pull from the rear in a ring motion. To remove them from the radio, simply press the corresponding tab that is now freed and slide them out. Disconnect the adapter, connector, and antenna, remembering how they were inserted. To remove the connector, pull the tab to your right.

Updated on 17 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to adjust the clock of the 2007 Ford Fiesta
How to adjust the clock of the 2007 Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) The following video tutorial shows the steps to follow to adjust the clock on the dashboard of the radio in a 2007 Ford Fiesta. Press the clock butto…
How to Find the Radio Code on the Ford Fiesta MK5
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this short video, you will see the main instructions that will allow you to find and enter the radio code to unlock it on the Ford Fiesta sixth ge…
Replacing the Standard Radio in the Ford Fiesta
Replacing the Standard Radio in the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Below are the instructions to remove and replace the standard radio in the Ford Fiesta, following these simple and quick steps. First, get inside the…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What to do when the Ford Fiesta radio doesn't work? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos