Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear and Reverse Light on Ford Fiesta Mk8

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Tail light

Open the rear hatch of the boot. As shown in the video, use a plastic trim tool (not metal or you will scratch everything!) to detach and remove the protective plastic located below the light. Now you can disconnect the connectors. Lower the hatch slowly while keeping one hand on the light as it will not be secured at this point. Once you reach this stage, it will be easy to pull out the light (already detached from the housing) and remove the affected bulb by simply turning it a quarter turn. Insert the new bulb, place the light back in position, and reassemble everything.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Light Bulbs on a Ford Fiesta
Replacing the Rear Light Bulbs on a Ford Fiesta
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) Today, we will go through the steps to remove and replace the rear light bulbs, including the stop light, reverse light, indicator, and fog light, on…
How to Replace the Rear Fog Light on a Ford Fiesta
How to Replace the Rear Fog Light on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this short and simple guide, learn how to remove and replace the reflector or rear fog light on a Ford Fiesta. To access the fog light on the rear…
How to Replace the Reverse Light Bulb on a Ford Fiesta
How to Replace the Reverse Light Bulb on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Replacing the reverse light bulb on your Ford Fiesta is undoubtedly one of the simplest tasks you can do independently. Before proceeding, for safety…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos