Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Fan on a Ford Fiesta Mk5

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Blower motor

In this video, we will see the main steps that will allow us to remove and replace the cabin fan on a fifth-generation Ford Fiesta. First, enter the vehicle and start removing the glove compartment; to do this, release the side clips and then pull it out, as shown in the video. Next, unscrew the securing screws of the air duct and the cabin filter using a Torx screwdriver; then unscrew all the securing screws of the cabin fan and disconnect the power connector to remove it!

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radiator Fan from a Ford Fiesta
How to Remove the Radiator Fan from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you begin, open the front bonnet of your Ford Fiesta. Start by removing the air filter housing and the associated hoses by unscrewing the resp…
Removing the Cabin Fan from a Ford Fiesta
Removing the Cabin Fan from a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video, you will see the entire air heating assembly of your vehicle's cabin, helping you locate the fan in its housing. This is positioned un…
Replacing the Fan Resistor on a Ford Fiesta
Replacing the Fan Resistor on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Are you having issues with the ventilation fan? Learn how to remove the fan resistor on a Fiesta. Open the car door and remove the trim plastics from…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos