Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Seatbelt Anchor on a Ford Focus MK3

Model: Ford Focus MK 3 - Years 2011-2018

In today's video, we will see how to remove the seatbelt anchor on a Ford Focus MK3 in simple and quick steps. First, get in the vehicle and start by removing the seat on the affected side, undoing the Torx screws found on the seat rails; then lift it and disconnect the electrical connectors underneath, as shown in the video. At this point, undo the fixing screw of the seatbelt anchor using a Torx T50 spanner; all that’s left is to remove it by disconnecting the electrical cable!

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Seatbelt on a Ford Focus
How to Replace the Seatbelt on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the seatbelt on a Ford Focus, remove the seals from the front and rear doors. Next, using a socket spanner, loosen the bolt at the bottom …
How to Replace the Seatbelt on a Ford Focus?
How to Replace the Seatbelt on a Ford Focus?
Ford Focus (2011-2018 / MK 3) To remove the seatbelt on a Ford Focus, use a tool to pry off the trim pieces located along the door pillar. Once the trim pieces are removed, procee…
How to Replace the Seatbelt on a Ford Focus
How to Replace the Seatbelt on a Ford Focus
Ford Focus (1998-2004 / MK 1) First, release the bonnet using the lever and lift it to disconnect the plugs connected to the battery. This prevents any unpleasant issues since the…

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos