Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Seatbelt on a Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Checks and maintenance

To remove the seatbelt on a Ford Focus, use a tool to pry off the trim pieces located along the door pillar. Once the trim pieces are removed, proceed to loosen the screws securing the seatbelt reel at the bottom and those securing the upper anchor. This will allow you to completely remove the old seatbelt so that you can install the new one: it must be secured by remounting the trim pieces.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Seatbelt on a Ford Focus
How to Replace the Seatbelt on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the seatbelt on a Ford Focus, remove the seals from the front and rear doors. Next, using a socket spanner, loosen the bolt at the bottom …
How to Replace the Seatbelt on a Ford Focus
How to Replace the Seatbelt on a Ford Focus
Ford Focus (1998-2004 / MK 1) First, release the bonnet using the lever and lift it to disconnect the plugs connected to the battery. This prevents any unpleasant issues since the…
How to Remove the Seatbelt Anchor on a Ford Focus MK3
How to Remove the Seatbelt Anchor on a Ford Focus MK3
Ford Focus (2011-2018 / MK 3) In today's video, we will see how to remove the seatbelt anchor on a Ford Focus MK3 in simple and quick steps. First, get in the vehicle and start by…

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos