Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : Ford Fiesta mk7 handle removal

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Handle
Operation: Ford Fiesta mk7 handle removal

Lift the screw cap located near the interior door handle by levering with a flat screwdriver. Unscrew the torx screw that was below it. Still leveraging (perhaps with a plastic lever), detach the internal handle. Now you will have freed the two screws which obviously have to be removed. Unscrew the plastic pins holding the panel in place. This must be removed simply by detaching it a little at a time from the joint, once again leveraging all its parts, gently, until it comes out of its seat. To remove the lock, just unscrew the side screws located in the door, which are made visible by opening the door. Detach the handle by pulling with a little force.


Posted on 13 February 2024 by ScegliAuto



How to remove the exterior handle in the Ford Fiesta?
Ford Fiesta (2017-2023 / MK VII, Fiesta 7, MK 7) In this tutorial we can see how to remove the external handle in the Ford Fiesta, a very simple and fast operation. First of all we open the door in
How to remove the interior handle in the Ford Fiesta?
Ford Fiesta (2017-2023 / MK VII, Fiesta 7, MK 7) In this tutorial we can see how to remove the interior handle in the Ford Fiesta, a very simple and quick operation, to be carried out for example in
Ford Fiesta exterior handle removal
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In today's video tutorial we will see how to remove the exterior door handle of a Ford Fiesta. First we open the door of the handle to be replaced an

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos