Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlamp Bulbs on Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Headlight bulb

In this guide, learn how to remove and replace the front headlamp bulbs on a second-generation Ford Focus. First, open and lift the bonnet of your car and remove the mounting screws of the headlamp bracket to take it out. Then, access the back of the headlamp, where you can remove the bulbs. Next, take off the protective caps from the bulbs and remove the one in question, as shown in the video: simply insert the new bulb, secure it with the metal clip, and reconnect the electrical connector before finally remounting the headlamp!

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlamp Bulbs on Ford Focus
Replacing Front Headlamp Bulbs on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Are the front headlamp bulbs on your Ford Focus blown? Let's replace them. Open the bonnet by pulling the lever located at the bottom right of the da…
How to Replace the Headlight Bulbs of a Ford Focus
How to Replace the Headlight Bulbs of a Ford Focus
Ford Focus (2011-2018 / MK 3) Let’s see how to replace the bulbs inside the front headlight of a Ford Focus. Lift the front bonnet by pulling the lever located at the bottom right…
How to Replace the Front Headlight Bulbs of a Ford Focus
How to Replace the Front Headlight Bulbs of a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Let's see how to replace the front headlight bulbs of a Ford Focus. Open the bonnet by pulling the lever located at the bottom right of the dashboard…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos