Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Complete Removal of Front Headlamp

Model: Ford Mondeo / Fusion MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight

See other generations:
Video tutorial

To completely remove the front headlamp assembly, open the bonnet and remove the two screws that secure the headlamp. Carefully pull the headlamp assembly out from its housing.

Remove the protective cap and then disconnect the electrical connector. Remove the lamp retaining spring by gently pulling it to detach it from the bulb holder.

Install the new bulb without touching the glass with your hands. Refit the bulb holder in its respective housing and reposition the headlamp assembly, closing the plastic cap first and securing it with the two clips.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

How to Replace Front Bulbs on Ford Mondeo
How to Replace Front Bulbs on Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) How do you remove the bulbs from the front headlamp of a Ford Mondeo? Let's look at the disassembly. Release the front bonnet by pulling the lever lo…
How to Replace the Front Headlamp Bulbs on a Ford Mondeo
How to Replace the Front Headlamp Bulbs on a Ford Mondeo
Ford Mondeo / Fusion (2000-2007 / MK 2) Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the headlamp inspection cover and remove it (…
How to Remove and Replace the Front Headlight on a Ford Mondeo
How to Remove and Replace the Front Headlight on a Ford Mondeo
Ford Mondeo / Fusion (2007-2014 / MK 3) This brief guide provides instructions on how to remove and replace the front headlight on a Ford Mondeo in simple steps. First, open the car's bonne…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos