Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How do i replace the headlight bulbs of the Ford Focus?

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Light bulb
Operation: How do i replace the headlight bulbs of the Ford Focus?

In order to replace the Ford Focus headlight bulbs you have to open the hood, fix it and with a screwdriver, loosen the bolt that fixes the headlight bracket. Subsequently it will be necessary to release the tab, positioned in the slot shown in the video, in order to detach the light from the bodywork. When this has been extracted, it will be necessary to lower the tabs that secure the internal cover, in order to extract the old bulb from its housing. At this point it will be possible to insert the new bulb, reposition the light and repeat the operations with the other light.


Posted on 22 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2011-2018 - How to replace the sidelights bulb on the Ford Focus? Read Answer
    • Focus 2018-2025 - How much does the position light bulb cost for the Ford Focus? Read Answer
    • Focus 1998-2004 - What to do if the Ford Focus hood light does not come on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos