Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Inner Panel of the Ford Ecosport Boot

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Door trim panel

How to remove the cover panel of the rear boot of the Ford Ecosport? Follow these steps to detach the cover panel from the top of the boot. Remove the screws located around the plastic parts of the cover panel. Once all screws are removed, pull the panel away from the boot by hand (disconnect any power wiring if present). Work inside the boot or replace only the cover panel if damaged. Refit the cover panel by reversing the disassembly steps.

Updated on 23 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to disassemble the rear tailgate panel of the Ford Ecosport
How to disassemble the rear tailgate panel of the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Today's steps will show us the process of disassembling and replacing the rear hatch panel of the Ford Ecosport, in this case with the hatch locked. …
How to Replace the Tailgate Lock on a Ford Ecosport
How to Replace the Tailgate Lock on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) In this brief and simple guide, you will find instructions on how to dismantle and replace the tailgate lock or boot lock on a Ford Ecosport. First, …
How to Open the Boot Lid of a Ford Ecosport
How to Open the Boot Lid of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you start, exit the cabin of your Ford Ecosport and head to the rear boot lid. Begin by grasping and pulling the handle located inside the rig…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos