Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Seat Recline Lever on the Ford Fiesta Mk6

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Seat

This guide shows how to replace the seat recline lever on the Ford Fiesta Mk6. To remove the lever handle, use a flat-head screwdriver to insert into the side of the cover to release it from the clips, applying slight pressure. Fitting the new lever is straightforward; simply position it and push it into place. At this point, the replacement operation is complete. Be careful not to break the plastic piece that holds the end of the seat release cable, as this will prevent further assembly.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front seat handle of the Ford Fiesta
How to replace the front seat handle of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today we will see the instructions that will allow us to disassemble and replace the handle of the backrest tilting of the front seat of the Ford Fie…
How to Replace the Seat Cable on the Ford Fiesta
How to Replace the Seat Cable on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide provides the main instructions on how to disassemble and replace the front seat cable on the Ford Fiesta. First, get in the vehicle and re…
How to Replace the Seat Handle on a Ford Fiesta
How to Replace the Seat Handle on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Today's guide will illustrate the main steps to remove and replace the reclining handle of the front seat on a Ford Fiesta. First, open the front doo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos