Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Ford
  4. :
  5. Fiesta
  6. : How do I replace the Ford Fiesta headlight?

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VII, Fiesta 7, MK 7 - Years 2017-2023
Part: Headlight
Operation: How do I replace the Ford Fiesta headlight?

In order to replace the Ford Fiesta headlight, you need to open the hood and loosen the screws located in the upper part of the headlight, on its supports. Once these screws have been removed, it will be possible to remove the headlight from its housing and disconnect its connector. Once the old headlight has been removed, it will be possible to replace the bulb or completely replace it with a new spare part. The headlight can therefore be reinserted into its housing, connected to the connector and fixed in the upper part with the relative bolts.


Posted on 5 March 2024 by ScegliAuto



How to replace headlight bulbs on Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Did a light bulb in your car go out? Let's see how to replace the headlight bulbs on Ford Fiesta: open the front hood by pulling the lever located at
How do you remove the front headlight of the Ford Fiesta?
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In order to remove the front headlight of the Ford Fiesta, you need to open the hood so that you can access the screws that secure the headlight from
How to replace the Ford Fiesta headlight bulb?
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In order to replace the headlight bulb of the Ford Fiesta you have to open the hood so that you can loosen the fixing screws of the headlight, locate

    Frequently Asked Questions

    • Fiesta 2002-2008 - How do you adjust the headlights of a 2005 Ford Fiesta? Read Answer
    • Fiesta 2008-2017 - Why don't the high beam headlights on Ford Fiesta work? Read Answer
    • Fiesta 2008-2017 - Why don't the front lights of the Ford Fiesta come on? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos