Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on the Ford Focus MK2?

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Tail light

Removing and replacing the rear light or a bulb on the Ford Focus MK2 is a very simple and quick task. You only need a Phillips screwdriver and a long flathead screwdriver, as shown in the video. Open the boot lid and use the Phillips screwdriver to remove the two screws located on the inner side of the light. Insert the long flathead screwdriver under the light and pull towards you, trying to release the plastic pins from the bodywork. Once freed, you can proceed to replace the entire unit or a bulb, depending on your needs.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the rear tail light of the Ford Focus?
How do you remove the rear tail light of the Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) Removing the headlight of a car does not necessarily mean having to replace it, there are those who carry out embellishment and customization works, …
How to replace the rear headlight bulb of the Ford Focus 2
How to replace the rear headlight bulb of the Ford Focus 2
Ford Focus (2004-2011 / MK 2, Focus 2) In this new mini guide dedicated to those of you who own a second series Ford Focus, we will explain the steps you need to take if you want to disass…
How to disassemble the rear headlight of the Ford Focus
How to disassemble the rear headlight of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) If you own a Ford Focus and want to learn how to disassemble the rear light on your own, all you have to do is read the following guide and apply wha…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos