Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Remove the Front Seat of the Ford Focus MK3

Model: Ford Focus MK 3 - Years 2011-2018
Part: Seat

In this brief and simple guide, we will see the procedure necessary for removing and replacing the front seat on the third generation Ford Focus. First, open the front door and start by unscrewing all the fixing screws found on the front seat rails; to do this, use a Torx T50 key, as shown in the video. At this point, slightly lift the seat and unscrew the screw for the electrical wiring using a socket spanner; then, simply remove the front seat. Apply the reverse procedure for reassembly!

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Seat from the Ford Focus
How to Remove the Front Seat from the Ford Focus
Ford Focus (2011-2018 / MK 3) Today, discover the instructions to remove and replace the front seat from the Ford Focus in simple steps. First, open the front door on the driver's…
How to Remove the Front Seat of the Ford Focus
How to Remove the Front Seat of the Ford Focus
Ford Focus (2011-2018 / MK 3) The steps in this guide will show you how to remove and replace the front seat of the Ford Focus. First, open the front and rear doors of the vehicle…
How to replace the cabin air filter of the Ford Focus 3
How to replace the cabin air filter of the Ford Focus 3
Ford Focus (2011-2018 / MK 3) In this new guide dedicated to all of you who own a Ford Focus Mk3, we will describe all the necessary steps to replace the cabin air filter on your …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos