Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Cabin Fan on a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Blower motor

See other generations:
Video tutorial

This guide shows you how to remove and replace the cabin fan motor on a Ford Focus. First, get inside the cabin and start by removing the glove compartment and the plastic cover on the passenger side, thus accessing the cabin fan; this will allow you to unscrew its fixing screws and then disconnect the electrical wiring to remove it, as shown in the video.

Now replace the cabin fan and reconnect it, checking its operation before refitting everything!


Updated on 17 October 2026 by ScegliAuto


Related tutorials

Guide to Removing the Fuel Pump from a Ford Focus
Ford Focus (1998-2004 / MK 1) Today's guide will illustrate the main steps for removing and replacing the fuel pump on a Ford Focus. First, open the rear doors and begin removing …
How to Remove the Cabin Fan Resistor on Ford Focus
How to Remove the Cabin Fan Resistor on Ford Focus
Ford Focus (1998-2004 / MK 1) To remove the cabin fan resistor, let's see how to do it from inside the dashboard. Open the glove compartment and detach it from inside the dashboar…
Guide to Removing the Cylinder Head on a Ford Focus
Guide to Removing the Cylinder Head on a Ford Focus
Ford Focus (2011-2018 / MK 3) Today's main instructions will show you how to remove and replace the engine cylinder head on a Ford Focus. First, lift the vehicle and start by remo…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos