Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Lights on a 2011 Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Fog lights

In this video, see how to remove the fog lights from the Ford Fiesta if they are broken. First, prepare all the necessary materials for a proper job: (Cross screwdriver, new fog lights). Use the screwdriver to remove the screw holding the outer cover of the fog light; at this point, you have access to the light, which is secured by four screws. Use the screwdriver to remove these screws. Detach the light with a gentle movement and then disconnect the electrical cable. Replace the light and reassemble all components in reverse order.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Fog Light Bulb of the Ford Fiesta
How to Replace the Front Fog Light Bulb of the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Below is the guide that will allow you to remove and replace the front fog light bulb of the Ford Fiesta. First, move to the front of the vehicle and…
How to Replace the Rear Fog Light on a Ford Fiesta
How to Replace the Rear Fog Light on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this short and simple guide, learn how to remove and replace the reflector or rear fog light on a Ford Fiesta. To access the fog light on the rear…
Where Are the Fog Light Controls in the Ford Fiesta?
Where Are the Fog Light Controls in the Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this tutorial, see where the fog light controls are located in the Ford Fiesta and how to activate them. As shown, the switch is on the driver's s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos