Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the remote battery of the Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Key

To replace the battery of the remote for the Ford Fiesta, press the two side tabs to lift the front cover. Removing it will allow you to extract the key blade underneath and lever the top part of its housing to separate the two halves that make up the remote. This will give you access to the battery, which can be extracted and replaced with a new spare part. After the new battery has been inserted, you can close the two halves, insert the key blade, and cover it with the appropriate cover.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Key Battery on the Ford Fiesta
How to Change the Key Battery on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide provides instructions for removing and replacing the battery in the remote key fob for the Ford Fiesta. First, take your remote and remove…
How to Replace the Battery in a Ford Fiesta Key
How to Replace the Battery in a Ford Fiesta Key
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) How to replace the battery in a Ford Fiesta key remote? In this video, see how to proceed with the battery replacement. Take your key remote and use …
How to Open the Door with the Ford Fiesta Key
How to Open the Door with the Ford Fiesta Key
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) How to open the door of your Ford Fiesta (new model) using the metal key from the remote? Take your remote and remove the plastic covering the metal …

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What does the yellow wrench light on the Ford Fiesta mean? Read answer
    • Fiesta 2008-2017 - What does the wrench light on my Ford Fiesta mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos