Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to remove the headlight of the Ford Fiesta Mk5

Ford Fiesta - Video tutorial

Model: Ford Fiesta Fiesta 5, MK V, MK 5 - Years 2002-2008
Part: Headlight
Operation: How to remove the headlight of the Ford Fiesta Mk5

The guide shows how to remove the headlight of the car. The first step is to open the bonnet and locate the three headlight fixing screws (one is under the bonnet mask) and unscrew them with the Torx T30. At this point, just remove the headlight unit and disconnect the electrical connection by pressing on the tab located on the connector. Now, to replace the bulb, simply unscrew the lamp cover cap and, after loosening the bulb fixing screw with the Torx T10, remove the bulb. Just follow the operations in reverse order to reassemble the headlight unit on the machine, making sure to check its exact alignment with the bodywork and then tighten the locking screws. Carry out a test to see the correct functioning of the light and the operation is finished. The tools required for this operation are: - Torx T10 screwdriver; - Torx T30 screwdriver.


Posted on 15 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Fiesta 2002-2008 - How do you adjust the headlights of a 2005 Ford Fiesta? Read Answer
    • Fiesta 2008-2017 - Why don't the high beam headlights on Ford Fiesta work? Read Answer
    • Fiesta 2008-2017 - Why don't the front lights of the Ford Fiesta come on? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos