Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Headlamp of a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Headlight

To remove the front headlamp of a Ford Fiesta, open the bonnet to access the screws securing the headlamp from the top: these will be located at the front and rear of the headlamp itself. Once these two screws are loosened and removed, you can pull out the rivet positioned at the top of the bumper; after this is removed, you can slide the headlamp out from the top and disconnect the connectors inside. This will allow you to connect the new headlamp and insert it into its housing, securing it with the appropriate screws.

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To install the LED bulb in the front headlamp of the Ford Fiesta, open the bonnet and loosen the two screws securing the headlamp at the top. This wi…
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) How to change the bulbs of the Ford Fiesta? Start by removing the bulbs and the front headlamp. Lift the front bonnet of the car, unscrew the securin…
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's video, you will learn how to remove and replace the position bulb of the front headlamp on a Ford Fiesta from 2008 to 2017. First, open th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos