Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the automatic gearbox bulb on the Ford Explorer?

Model: Ford Explorer U251, MK 4 - Years 2006-2010
Part: Light bulb

Today, let's see how to change the automatic gearbox bulb on the Ford Explorer. Lift the armrest, and using a spanner, unscrew the two screws at the end of the centre console to free the plastic around the gearbox. Once this is done, you will see that on the lower right side connected to a fuse is the bulb; simply disconnect it from its socket, replace it with a new bulb, and reconnect it. At this point, switch on the ignition and check if the bulb works, then reassemble the plastic console and you're done.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Indicator Bulb on a Ford Explorer
How to Replace the Front Indicator Bulb on a Ford Explorer
Ford Explorer (1995-2001 / MK 2, Un105, Un150) To replace the indicator bulb on a Ford Explorer, open the bonnet and lift the cover at the front of the engine bay; this will allow you to access th…
How to Replace the Front Headlight Bulb in a Ford Explorer?
How to Replace the Front Headlight Bulb in a Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) Replacing the front headlight bulb in the Ford Explorer is a very simple task; let’s see how to proceed in this tutorial. First, ensure the key is no…
How to Replace the Rear Light Bulb on the Ford Explorer?
How to Replace the Rear Light Bulb on the Ford Explorer?
Ford Explorer (2006-2010 / U251, MK 4) To replace the rear light bulb on the Ford Explorer, open the tailgate of the boot to access the bolts located between the light and the seal. By uns…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos