Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Explorer
    4. : Replace the Ford Explorer 5 rear indicator bulb

Ford Explorer - Video tutorial

Model: Ford Explorer U502, MK 5 - Years 2011-2019
Part: Rear light bulb
Operation: Replace the Ford Explorer 5 rear indicator bulb

Let's see in this video how to remove and replace the rear light bulbs and in particular that of the arrow of the Ford Explorer fifth series. First of all we open the tailgate of the trunk and start by unscrewing the screws that we find on the sides of the light; then we disconnect the electrical connectors to remove it, as shown in the video. At this point we extract the bulb holder of the arrow bulb, removing and replacing the bulb bulb; replace, if necessary, the other bulbs and then reassemble everything, applying the reverse procedure!


Posted on 13 July 2022 by ScegliAuto



How to replace the front indicator light bulb on the Ford Explorer?
Ford Explorer (1995-2001 / Un105, Un150, MK 2) In order to replace the Ford Explorer indicator light bulb, you have to open the hood and lift the cover of the front part of the engine compartment;
How to remove the rear light in the Ford Explorer?
Ford Explorer (2011-2019 / U502, MK 5) In this video we can see how to remove the rear light in the Ford Explorer, useful in case we need to replace a light bulb or the light itself. To do
How to replace the rear light bulb on the Ford Explorer?
Ford Explorer (2006-2010 / MK 4, U251) To be able to use the rear light bulb of the Ford Explorer you have to go to open the tailgate of the luggage compartment, so that you can loosen the

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos