Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on the Ford Explorer?

Model: Ford Explorer MK 4, U251 - Years: 2006, 2007, 2008, 2009, 2010
Part: Light bulb

See other generations:
Video tutorial

To replace the rear light bulb on the Ford Explorer, open the tailgate of the boot to access the bolts located between the light and the seal. By unscrewing these bolts, the light can be removed from its housing, allowing you to disconnect the connectors at the back.

Once the connectors are removed, you can pull out the old bulbs and replace them with new spare parts. After connecting them to the connectors, insert them back into the light, which should then be secured back into its housing.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on a Ford Explorer?
How to Replace the Rear Light Bulbs on a Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) In this tutorial, see how to replace the rear light bulbs on a Ford Explorer. This is a very simple and quick operation. Start by opening the boot li…
How to Remove the Rear Light on the Ford Explorer?
How to Remove the Rear Light on the Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) This video shows how to remove the rear light on the Ford Explorer, useful if you need to replace a bulb or the light itself. To do this, open the ta…
How to Replace the Front Headlamp Bulb on a Ford Explorer?
How to Replace the Front Headlamp Bulb on a Ford Explorer?
Ford Explorer (2006-2010 / MK 4, U251) To replace the front headlamp bulb on a Ford Explorer, open the bonnet to loosen the bolts securing the headlamp at the top. Once these two bolts hav…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos