Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the instrument panel bulbs in the Ford Explorer?

Model: Ford Explorer MK 2, Un105, Un150 - Years 1995-2001
Part: Light bulb

In this tutorial, you will see how to replace the instrument panel bulbs in the Ford Explorer, a very simple and quick operation. First, ensure that the key is not inserted, then remove the lower dashboard panel by unscrewing the relevant bolts. Next, unscrew any additional screws that have been exposed, disengage the central console trim, and proceed to remove the remaining retaining bolts. At this point, simply remove the instrument panel, extract the faulty bulb, insert the replacement, and follow the reverse procedure to reassemble everything.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Instrument Cluster Bulbs in the Ford Explorer
How to Replace the Instrument Cluster Bulbs in the Ford Explorer
Ford Explorer (2006-2010 / U251, MK 4) In this tutorial, you will learn how to replace the instrument cluster bulbs in the Ford Explorer, a very simple and quick operation. Start by unscre…
How to Replace the Rear Light Bulbs on the Ford Explorer MK4
How to Replace the Rear Light Bulbs on the Ford Explorer MK4
Ford Explorer (2006-2010 / U251, MK 4) In this video, see how to disassemble and replace the rear light bulbs on the fourth series Ford Explorer in simple steps. First, open the rear tailg…
Replacing the Rear Indicator Bulb on a Ford Explorer 5
Replacing the Rear Indicator Bulb on a Ford Explorer 5
Ford Explorer (2011-2019 / MK 5, U502) In this video, you will learn how to remove and replace the bulbs of the rear light, specifically the indicator bulb on a fifth series Ford Explorer.…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos