Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Light Bulbs on the Ford Explorer MK4

Model: Ford Explorer U251, MK 4 - Years 2006-2010
Part: Tail light bulb

In this video, see how to disassemble and replace the rear light bulbs on the fourth series Ford Explorer in simple steps. First, open the rear tailgate and start by unscrewing the fixing screws of the rear light, which are located on the sides; then disconnect the electrical connectors of the bulbs, removing them along with the bulb holders, as shown in the video. At this point, remove and replace the bulbs with new ones of the correct type; insert them properly before reinserting them back into the light; then reassemble everything!

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Explorer (2006-2010 / U251, MK 4) To replace the rear light bulb on the Ford Explorer, open the tailgate of the boot to access the bolts located between the light and the seal. By uns…
Ford Explorer (2011-2019 / MK 5, U502) In this video, you will learn how to remove and replace the bulbs of the rear light, specifically the indicator bulb on a fifth series Ford Explorer.…
Ford Explorer (2002-2005 / U152, MK 3) Today, you will see in this short video how to remove and replace the rear light on the Ford Explorer Sport Trac in simple steps. Move to the rear of…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos