Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on a Ford Explorer?

Model: Ford Explorer MK 5, U502 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, see how to replace the rear light bulbs on a Ford Explorer. This is a very simple and quick operation.

Start by opening the boot lid, remove the two plastic caps located on the inner edge of the light and unscrew the 8mm bolts underneath. Once done, pull the light towards the rear of the car to release the internal clip and proceed to replace the faulty bulb.

To remove a bulb holder, simply rotate it about 90 degrees counterclockwise. Once the replacement bulb is inserted, follow the reverse procedure to reassemble everything.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on the Ford Explorer MK4
How to Replace the Rear Light Bulbs on the Ford Explorer MK4
Ford Explorer (2006-2010 / MK 4, U251) In this video, see how to disassemble and replace the rear light bulbs on the fourth series Ford Explorer in simple steps. First, open the rear tailg…
Replacing the Rear Indicator Bulb on a Ford Explorer 5
Replacing the Rear Indicator Bulb on a Ford Explorer 5
Ford Explorer (2011-2019 / MK 5, U502) In this video, you will learn how to remove and replace the bulbs of the rear light, specifically the indicator bulb on a fifth series Ford Explorer.…
How to Replace the Front Headlamp Bulb on a Ford Explorer?
How to Replace the Front Headlamp Bulb on a Ford Explorer?
Ford Explorer (2006-2010 / MK 4, U251) To replace the front headlamp bulb on a Ford Explorer, open the bonnet to loosen the bolts securing the headlamp at the top. Once these two bolts hav…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos