Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to remove the rear door panel of a Ford Fiesta

Ford Fiesta - Video tutorial

Model: Ford Fiesta Fiesta 7, MK VII, MK 7 - Years 2017-2023
Part: Door
Operation: How to remove the rear door panel of a Ford Fiesta

To remove the rear door panel of a Ford Fiesta it is necessary to extract the catch present in the handle inside the car and with a screwdriver unscrew the screw contained inside. Now remove the two screws at the bottom of the door. Proceed with the help of a thin admiral to extract the clip inserted inside the window knob and extract it from the door. Then hold the panel and unhook it a little at a time from the door. To conclude the operation, simply loosen the catch connected to the door handle by levering the clips, in such a way as to pull the handle out as well.


Posted on 22 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Fiesta 2002-2008 - Why do the doors of the Ford Fiesta 5 not open? Read Answer
    • Fiesta 2002-2008 - Why doesn't the Ford Fiesta door close? Read Answer
    • Fiesta 1996-2002 - Why doesn't the Ford Fiesta door close? Read Answer
    • Fiesta 1996-2002 - Why doesn't the Ford Fiesta door close? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos