Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the bulb on a 2009 Ford Focus.

Ford Focus - Video tutorial

Model: Ford Focus MK 4 - Years 2018-2024
Part: Light bulb
Operation: How to replace the bulb on a 2009 Ford Focus.

To replace the bulb of a Ford Focus it is necessary to carry out some steps, which we will be able to see in this video. To start we open the hood of our car and unscrew the screw that secures the headlight to the body, as shown at minute 0: 20. We will then have to detach two plastic hooks, the first shown at 0: 50 and the second, on the right side of the lighthouse, in the slot next to the screw we unscrewed at the beginning (shown at 1:07). Now it will be possible to extract the headlight to operate in the rear holes, from where it will be possible to replace it. We detach the cap and extract the bulb, replacing it with the new one. Close the hole with the appropriate cap and reinsert the lighthouse, making sure that the two plastic hooks are correctly inserted. At this point all that remains is to screw the headlight back to the bodywork.


Posted on 22 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 2011-2018 - How to replace the sidelights bulb on the Ford Focus? Read Answer
    • Focus 2018-2025 - How much does the position light bulb cost for the Ford Focus? Read Answer
    • Focus 1998-2004 - What to do if the Ford Focus hood light does not come on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos