Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter on the Ford Explorer?

Model: Ford Explorer MK 5, U502 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin filter on the Ford Explorer, open the glove compartment located on the passenger side. Once opened, loosen the screws inside so that the internal compartment can be removed, providing access to the rear.

Here, there will be a rectangular cover that needs to be removed, allowing access to the filter. At this point, the cabin filter can be taken out of its housing and replaced with a new spare part.

After replacement, reinstall all previously removed parts.


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Ford Explorer
How to Replace the Cabin Filter on a Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) To replace the cabin filter on a Ford Explorer, open the glove compartment located on the passenger side and loosen the screws securing it in place. …
Replacing the Cabin Air Filter on the Ford Explorer
Replacing the Cabin Air Filter on the Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) This guide shows you the procedure to remove and replace the cabin air filter on the Ford Explorer, following these simple steps. First, open the fro…
How to Replace the Cabin Filter on the 2017 Ford Explorer
How to Replace the Cabin Filter on the 2017 Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) If the cabin air filter of your fifth-generation Ford Explorer (2017) is excessively worn and you want to replace it yourself, simply read the follow…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos