Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on the Ford Explorer

Model: Ford Explorer MK 5, U502 - Years 2011-2019
Part: Cabin air filter

This guide shows you the procedure to remove and replace the cabin air filter on the Ford Explorer, following these simple steps. First, open the front passenger door and then open the glove compartment; next, remove the rectangular plastic cover of the pollen filter box, taking out the cartridge inside, as shown in the video. At this point, install the new cabin air filter, inserting it in the correct direction (usually indicated by arrows printed on the filter); refit the cover and close the glove compartment!

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on the Ford Explorer (2020-2022)
How to Replace the Cabin Air Filter on the Ford Explorer (2020-2022)
Ford Explorer (2020-2026 / U625, MK 6) Discover step-by-step instructions to remove and replace the cabin air filter on the Ford Explorer (2020-2022). First, get inside the vehicle and sta…
Fuse Box of a Ford Explorer
Ford Explorer (2006-2010 / U251, MK 4) This useful video shows the location of the two fuse boxes in our Ford Explorer, Sport Trac model, produced from 2006 to 2010. As seen in the tutoria…
How to Open the Remote for a Ford Explorer?
How to Open the Remote for a Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) In this tutorial, you will see how to open the remote for a Ford Explorer, a very simple and quick operation, for example, to replace the battery. To…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos