Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Ford Explorer

Model: Ford Explorer U251, MK 4 - Years 2006-2010
Part: Air filter

In today's video, see how to replace the air filter on a 2006-2010 Ford Explorer. First, open the front bonnet by pulling the relevant lever inside the cabin. Now locate the intake duct and proceed to remove the cover that conceals the worn air filter. Once the relevant clips are released, extract the filter. Clean the area before installing the new air filter and then insert it. Close the cover, secure the clips, and the operation will be complete. As we have seen, it was a quick job.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter on the Ford Explorer
Replacing the Cabin Air Filter on the Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) This guide shows you the procedure to remove and replace the cabin air filter on the Ford Explorer, following these simple steps. First, open the fro…
How to Replace the Cabin Filter on the 2017 Ford Explorer
How to Replace the Cabin Filter on the 2017 Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) If the cabin air filter of your fifth-generation Ford Explorer (2017) is excessively worn and you want to replace it yourself, simply read the follow…
How to replace the air filter on the Ford Explorer?
How to replace the air filter on the Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) In this video, you can see how to replace the air filter on the Ford Explorer, a very simple and quick operation. Start by opening the bonnet and mov…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos