Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the air filter on the Ford Explorer?

Model: Ford Explorer MK 5, U502 - Years 2011-2019
Part: Air filter

In this video, you can see how to replace the air filter on the Ford Explorer, a very simple and quick operation. Start by opening the bonnet and moving to the driver's side. Disconnect the connector from the sensor located in the intake manifold and unscrew the metal clamp screw. At this point, after removing the entire top part of the airbox, extract the old filter and thoroughly clean the inside of the box. Once done, insert the new filter in the correct orientation and reassemble everything by simply following the reverse procedure.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Explorer (2006-2010 / U251, MK 4) In today's video, see how to replace the air filter on a 2006-2010 Ford Explorer. First, open the front bonnet by pulling the relevant lever inside t…
Ford Explorer (2011-2019 / MK 5, U502) This guide shows you the procedure to remove and replace the cabin air filter on the Ford Explorer, following these simple steps. First, open the fro…
Ford Explorer (2011-2019 / MK 5, U502) To replace the air filter on a Ford Explorer, open the bonnet and disconnect the connectors and the hose attached to the box containing the filter. T…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos