Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter in the Ford Explorer 6

Model: Ford Explorer U625, MK 6 - Years 2020-2026
Part: Cabin air filter

In this new guide dedicated to your new Ford Explorer Mk6 (2020-2022), discover how to replace the cabin air filter independently and safely. The entire operation will take only a few minutes to complete. First, ensure your car is turned off and parked on a flat surface. Then, go to the passenger side and open the glove compartment. Next, unclip the side hooks and remove it. Finally, locate the filter box at the rear, remove the protective cover, and replace the old filter with the new one.

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on the 2017 Ford Explorer
How to Replace the Cabin Filter on the 2017 Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) If the cabin air filter of your fifth-generation Ford Explorer (2017) is excessively worn and you want to replace it yourself, simply read the follow…
How to Replace the Cabin Filter on a Ford Explorer
How to Replace the Cabin Filter on a Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) In this video tutorial, you will see how to replace the cabin filter on a Ford Explorer by following a few simple steps: the first thing to do is to …
Replacing the Cabin Air Filter on the Ford Explorer
Replacing the Cabin Air Filter on the Ford Explorer
Ford Explorer (2011-2019 / MK 5, U502) This guide shows you the procedure to remove and replace the cabin air filter on the Ford Explorer, following these simple steps. First, open the fro…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos