Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fuel Pump from a Ford Focus MK1

Model: Ford Focus MK 1 - Years 1998-2004
Part: Fuel pump

Follow these steps to remove the fuel pump (float) from a first-generation Ford Focus. First, access the pump located under the rear seat of your car; once the seat is removed, take off part of the partition to reach the float. Next, disconnect the electrical connector from the pump and remove the fuel line: then unscrew the pump's retaining ring by tapping the sides with a tool, as shown in the video. Finally, remove and replace the float pump, following the tutorial to the end!

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the High-Pressure Diesel Pump on the Ford Focus 2.0 TDCI
How to Remove the High-Pressure Diesel Pump on the Ford Focus 2.0 TDCI
Ford Focus (2004-2011 / MK 2, Focus 2) In this video tutorial, follow the main instructions to remove and replace the high-pressure diesel pump on the second series Ford Focus with a 2.0 T…
How to Remove the Diesel Filter from a Ford Focus
How to Remove the Diesel Filter from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Before you can start, open the bonnet of your Ford Focus. Begin by unclipping and removing the upper engine cover. Next, unscrew and remove the bolts…
Replacing the Diesel Filter on a Ford Focus
Replacing the Diesel Filter on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Do you want to replace the diesel filter on your Ford Focus? Let’s look at removing the filter. Locate the diesel filter as shown in the video. Disco…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos