Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight and Install LEDs in a Ford Fiesta

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Headlight bulb

In this video, dedicated to the Ford Fiesta, you will see how to remove the front headlight on the passenger side to install new LED bulbs. Start by removing the headlight unit by unscrewing the two screws that hold it in place. Now disconnect the power connector and pull the headlight out of its housing. Remove the rubber dust cover and detach the original bulb; you can now extract it from its position. Install the new LED bulb, which has a fan and requires a specific closure cap. Now proceed in reverse for reassembly.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install the LED Bulb in the Front Headlamp of the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To install the LED bulb in the front headlamp of the Ford Fiesta, open the bonnet and loosen the two screws securing the headlamp at the top. This wi…
How to Replace the Front Headlight Bulb on the Ford Fiesta
How to Replace the Front Headlight Bulb on the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Today, we will explain how to replace the front headlight bulb on a Ford Fiesta, switching from a standard bulb to an LED. No modifications to the co…
How to Remove the Front Headlights of a Ford Fiesta?
How to Remove the Front Headlights of a Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) The front headlight unit of the Ford Fiesta is secured in place by two screws and a plastic clip. Therefore, gather a screwdriver and a lever and rem…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos