Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Heating Controls from a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Air conditioning

How do you remove the air conditioning controls from a Ford Fiesta? Follow these steps. Remove the frame from the central dashboard using a plastic lever; unscrew the securing screws on the sides of the air conditioning controls with a screwdriver. Disconnect the control panel from the dashboard, pulling it out from the instrument panel as shown in the video, being careful not to break the locking tabs (disconnect the electrical connectors). After removing the knobs from the panel, replace the bulbs or LEDs with new ones. Reassemble all parts in reverse order.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the heating resistor located in the Ford Fiesta?
Where is the heating resistor located in the Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video, you can see where the heating resistor is located in the Ford Fiesta and how to proceed if you need to replace it, a very simple and q…
How do you remove the heating fan in the 2005 Ford Fiesta?
How do you remove the heating fan in the 2005 Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) The heating fan of the 2005 Ford Fiesta's cabin may require maintenance and therefore disassembly if it does not turn on. A first check is done on th…
Where is the heating resistor located in the Ford Fiesta?
Where is the heating resistor located in the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, see where the heating resistor is located in the Ford Fiesta and how to proceed if you need to replace it, a very simple and quick ope…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos