Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Boot Lock of the Ford Fiesta 5

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Trunk lock

In today's tutorial video, you will learn how to remove and replace the boot lock of the fifth series Ford Fiesta in simple steps. First, open the tailgate and start by removing the tailgate panel, unscrewing the fixing screws; then disconnect the lock cable, as shown in the video. At this point, unscrew the screws of the electric lock to remove it and replace it with the new one; finally, refit the new lock by following the reverse procedure of disassembly!

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Lock in the Tailgate of a Ford Fiesta
How to Remove the Lock in the Tailgate of a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) How do you remove the lock in the tailgate of a Ford Fiesta? Let's see how to do it. Open and lift the tailgate of your car. Using a screwdriver, uns…
How to Remove the Door Lock of a Ford Fiesta
How to Remove the Door Lock of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before starting, open the door of your Ford Fiesta. First, unclip and remove the side cover of the screw that secures the handle and the lock to the …
Replacing the Rear Boot Solenoid on a Ford Fiesta Mk6
Replacing the Rear Boot Solenoid on a Ford Fiesta Mk6
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, you will see how to remove and replace the solenoid or actuator for the rear boot lock on a sixth series Ford Fiesta. First, …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos