Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Lock on a Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Door lock

See other generations:
Video tutorial

In this tutorial, you can see how to dismantle the external lock on a Ford Fiesta MK7, a very simple and quick operation. First, open the relevant door, then locate the small plastic cap on the inner edge, right at the lock height, and remove it using a flat-head screwdriver.

Next, loosen the bolt accessible through the hole with a Torx T20 key, grasp the lock cylinder, and pull it out of the housing. To fit the replacement, simply follow the reverse procedure.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

Remove the Boot Lock of the Ford Fiesta 5
Remove the Boot Lock of the Ford Fiesta 5
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In today's tutorial video, you will learn how to remove and replace the boot lock of the fifth series Ford Fiesta in simple steps. First, open the ta…
How to Replace the Lock Actuator of a Ford Fiesta
How to Replace the Lock Actuator of a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Today's instructions will show you how to dismantle and replace the lock actuator of the front door of the Ford Fiesta. First, open the front door an…
How to Remove the Rear Lock on a Ford Fiesta?
How to Remove the Rear Lock on a Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this tutorial, you will see how to remove the rear door lock on a Ford Fiesta. First, open the relevant door, then unclip the cover at the outer c…

    Frequently Asked Questions

    • Fiesta 2017-2023 - How much does it cost to replace a Ford Fiesta lock? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos