Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Lock on a Ford Fiesta?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Door lock

In this tutorial, you will see how to remove the rear door lock on a Ford Fiesta. First, open the relevant door, then unclip the cover at the outer corner of the window. Unscrew the indicated screws and, using a plastic spatula, unclip the panel from the door by prising it along the perimeter. Once done, disconnect both the window regulator connector and the lock cable, and proceed to remove the internal door cover. At this point, you can remove the external handle, unscrew the 3 fixing bolts of the lock, and extract the lock from its housing.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Boot Lock of the Ford Fiesta 5
Remove the Boot Lock of the Ford Fiesta 5
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In today's tutorial video, you will learn how to remove and replace the boot lock of the fifth series Ford Fiesta in simple steps. First, open the ta…
How to Remove the Rear Door Panel on a Ford Fiesta?
How to Remove the Rear Door Panel on a Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) As shown in this tutorial, removing the rear door panel on a Ford Fiesta is a simple and quick task. Start by opening the door in question, then remo…
How to Dismantle the Lock on a Ford Fiesta?
How to Dismantle the Lock on a Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this tutorial, you can see how to dismantle the external lock on a Ford Fiesta MK7, a very simple and quick operation. First, open the relevant do…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2017-2023 - How much does it cost to replace a Ford Fiesta lock? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos