Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Boot Gas Struts on a Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Shocks

In this video tutorial, learn how to remove and replace the gas struts for the boot lid of a fifth-generation Ford Fiesta, following these simple instructions. First, open the boot and unclip the appropriate fasteners of the gas struts found at the top; then, pull and detach them from the upper support, repeating the same operation on the other side. Next, clean the anchoring area and refit the new hydraulic struts, applying the reverse procedure and following the tutorial to the end!

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Boot Tailgate of the Ford Fiesta
How to Remove the Boot Tailgate of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, you will see the instructions to remove and detach the boot tailgate of the Ford Fiesta. First, open the boot lid and start disconnecting the …
Disassembly of the rear tailgate panel of the Ford Fiesta
Disassembly of the rear tailgate panel of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today we will see the instructions that will allow us to disassemble and replace the rear tailgate panel of the Ford Fiesta. First of all, we open th…
Replacing Hydraulic Struts on Ford Fiesta
Replacing Hydraulic Struts on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Open the boot and use a flat-head screwdriver, as shown in the video, to detach the strut from its mount. Do this on both ends of the strut and suppo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos