Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulb on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Door trim panel

Do you want to replace the rear light bulb on your Fiesta? Lift the tailgate, then uncover the protection on the side of the boot. Unscrew the plastic nuts inside the compartment, unscrew the screws at the sides of the rear light plastics, disconnect the power connectors attached to the light, and pull it out of its housing. Replace the damaged bulbs with new ones (same voltage) at hand. Refit the light with the respective securing nuts, reattach the inspection cover, and finally test the correct operation of the newly fitted bulbs.

Updated on 4 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change a Bulb on a Ford Fiesta
How to Change a Bulb on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Do you want to change the damaged bulb of a Ford rear light? Follow this video closely to proceed. Open the boot, remove the side fabric trim, unscre…
Removing the Rear Light on a 2008 Ford Fiesta
Removing the Rear Light on a 2008 Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's tutorial, you will learn how to remove the rear light to replace the bulbs on a 2008 Ford Fiesta. First, open the boot lid and unscrew the…
How to Replace the Bulb of a Rear Headlamp on a Ford Fiesta
How to Replace the Bulb of a Rear Headlamp on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This tutorial shows how to replace a bulb in the rear headlamp of a Ford Focus. Open the boot and remove the side trim; you will find a tab or a cap …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos