Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Escape
    4. : How to remove the front bumper of a Ford Escape.

Ford Escape - Video tutorial

Model: Ford Escape MK 1 - Years 2001-2007
Part: Front bumper
Operation: How to remove the front bumper of a Ford Escape.

In this guide we will discover the procedure to replace the front bumper of a Ford Escape. We open the hood and unscrew the two screws shown at minute 0:40. Now we go to the compartment of the front wheels and unscrew the 3 screws on each side in the area behind the bumper and the two in the area under the license plate. Let's go back to the front wheel compartment and go to act on the screws, one on each side, behind the plastic panel, as shown at 2: 20. Now unscrew the last seven screws, under the bumper, which hold the piece in place. At this point the plastic supports in the lower part of the car will be disconnected and this will allow us to extract the piece.


Posted on 28 March 2024 by ScegliAuto



How do you remove the front bumper of the Ford Escape?
Ford Escape (2008-2012 / MK 2) In order to remove the front bumper of the Ford Escape it will be necessary to open the hood so that the bolts that secure it from the top can be uns
Disassembly of the front bumper of the Ford Escape
Ford Escape (2013-2019 / MK 3) Shortly we will see the instructions that will allow us to disassemble and replace the front bumper of the Ford Escape, in simple steps. First, we op
How to replace the front fog lights on Ford Escape
Ford Escape (2001-2007 / MK 1) Let's see in this guide how to remove and replace the Ford Escape front fog lights. First of all we lift the car and start by unscrewing the screws t

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos