Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper and headlights on a Ford Focus MK2

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Front bumper

In today's tutorial video, we will see the instructions for removing the front bumper and headlights on a Ford Focus MK2. First, lift the vehicle at the front and remove the front wheels; then unscrew the screws found on both sides of the wheel arches and the additional screws securing the bumper, located at the top and bottom. At this point, gently detach the bumper, starting from the sides; once removed, unscrew the screws securing the headlights, then disconnect the electrical connector of the bulbs to remove them!

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the Front Bumper of a Ford Focus
Remove the Front Bumper of a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Remove the front bumper of the Focus? Here’s how to take it off from the front of the car. Lift the bonnet, raise the car with a jack. Remove the cen…
How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…
Removing Front Bumper on Ford Focus
Removing Front Bumper on Ford Focus
Ford Focus (1998-2004 / MK 1) Do you want to remove the front bumper from a Ford Focus? Lift the front bonnet and let's see how to remove the front bumper. Remove the central gril…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos