Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of the Ford Fiesta

Model: Ford Fiesta Fiesta 4, Be91, MK 4, MK IV - Years 1996-2002
Part: Tail light

Undo the two retaining screws with a Torx screwdriver (the screws are Torx 30 type). Remove the light unit by gently lifting it and then disengaging it from the mounting pins. Remove the bulb holder and extract the burnt-out bulb. Replace it with a new one. If you need to completely remove the light unit, simply disconnect the power cable and you can take it out of its housing. The stop and position bulb is a common P21/5W, which you can also find in supermarkets. Now proceed with reassembly by following the steps in reverse. You can test the bulb before reassembling everything to check its functionality.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Light on Ford Fiesta
Removing the Rear Light on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's tutorial, we will see how to remove the rear light of a Ford Fiesta in simple steps. First, open the boot lid and use a Torx screwdriver t…
Removing the Rear Light on a 2008 Ford Fiesta
Removing the Rear Light on a 2008 Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's tutorial, you will learn how to remove the rear light to replace the bulbs on a 2008 Ford Fiesta. First, open the boot lid and unscrew the…
Disassembly of the rear light of a Ford Fiesta
Disassembly of the rear light of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Through this very short video tutorial today, you will be able to see the entire necessary procedure step by step to disassemble the rear light of a …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos