Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Wiper Control Lever of a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017

Discover how to remove and replace the wiper control lever of a Ford Fiesta. First, get inside the vehicle and start by removing the plastic cover behind the steering wheel, prying it off from the sides; then unclip the wiper control lever by disconnecting the power connector, as shown in the video. At this point, replace the entire control with the new one, using the original spare part; now proceed to reassemble the lever, applying the reverse procedure of disassembly!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Use the Wipers on a Ford Fiesta?
How to Use the Wipers on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To use the wipers on a Ford Fiesta, operate the lever located to the right of the steering wheel, which also has the wiper symbols. To simply activat…
How to Replace the Wiper Blades on a Ford Fiesta
How to Replace the Wiper Blades on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, you will see how to replace the wiper blades on a Ford Fiesta by following a few simple steps: first, purchase new wiper blad…
How to Activate the Wipers on the Ford Fiesta
How to Activate the Wipers on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's tutorial video, you will learn all the secrets of the wipers on the Ford Fiesta. Press the button on the right lever to activate the washe…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos