Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ka
    4. : How to remove the light switch from the Ford Ka

Ford Ka - Video tutorial

Model: Ford Ka MK 1 - Years 1996-2008
Operation: How to remove the light switch from the Ford Ka

Let's see in this guide how to remove and replace the light switch, but also the operating lever of the wipers and indicators, of the Ford Ka. First of all, we open the bonnet and begin to disconnect our battery beforehand; then we get on board the car and unscrew the screws that we find under the cover of the light switch, in order to remove it, as shown in the video. At this point we are going to unscrew the screws of our light switch, disconnecting the electrical connectors; then we remove our switch and replace it, eventually, with the new one!


Posted on 16 April 2024 by ScegliAuto



How do I reset the Ford Ka Service light?
Ford Ka (2008-2016 / MK 2) In order to reset the Ford Ka's service warning light, you have to turn the key to turn on the instrument panel and keep the accelerator and brake pe
How to reset Ford Ka tire pressure with power button
Ford Ka (2016-2019 / MK 3) The guide shows how to reset the tire pressure warning light for Ford Ka with power button. With the instrument panel off, the first step is to hold
How do I reset the Ford Ka Service light?
Ford Ka (2016-2019 / MK 3) In order to reset the Ford Ka's Service light, you need to press and hold the button located on the right side of the instrument panel. While holding

    Frequently Asked Questions

    • Ka 2008-2016 - How much does it cost to replace the seat tilt lever on a Ford Ka? Read Answer
    • Ka 2016-2019 - How to retrieve the radio code of a Ford Ka? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos