Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Oxygen Sensor on the Ford Explorer V8 4.6L

Model: Ford Explorer U251, MK 4 - Years 2006-2010
Part: Oxygen sensor

Discover in this brief and simple guide the instructions that will allow you to remove and replace the oxygen sensor or lambda probe of the Ford Explorer with a V8 4.6 litre engine. First, lift the vehicle and locate the oxygen sensor, situated above the catalytic converter; then disconnect its electrical connector and unscrew the lambda probe using an 18 mm socket spanner, as shown in the video. At this point, remove and replace the oxygen sensor with the new one, following the video until the end!

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter on the Ford Explorer?
How to replace the air filter on the Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) In this video, you can see how to replace the air filter on the Ford Explorer, a very simple and quick operation. Start by opening the bonnet and mov…
How to disassemble the power window switch panel of the Ford Explorer
How to disassemble the power window switch panel of the Ford Explorer
Ford Explorer (2020-2026 / U625, MK 6) The instructions provided in this guide will show us how to disassemble and replace the power window switch panel of the Ford Explorer. First, we ope…
How to Open the Remote for a Ford Explorer?
How to Open the Remote for a Ford Explorer?
Ford Explorer (2011-2019 / MK 5, U502) In this tutorial, you will see how to open the remote for a Ford Explorer, a very simple and quick operation, for example, to replace the battery. To…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos